Contact us to purchase


The QUIC-LIFT system at a glance: Base castings come in sets of two. The switch should be mounted outside the operational envelope of the system in a location providing the operator with an uniterrupted view of ladders and personnel during removal and storage operations. Systems are easily installed on existing pumpers or tankers. Works with aluminum ladders and hard sleeves commonly carried on fire apparatus. Keeps ladders and hard sleeves close to the vehicle, when lowered, for tight apparatus positioning. Flashing light kit provided to produce a visual signal when the system is out of the stored position. Mounting brackets may be attached to castings for storage of folding ladders and pike poles. Lowers ladders and hard sleeves 31" from the stored position. Has a depth of 6", less ladders. Powered by two durable high cycle electric actuators (12 V). We recommend the manual or electric locking systems be used whenever a hard sleeve tray is mounted over the LAS or HSS systems. The QUIC-LIFT Hard Sleeve System lowers two (or more) hard sleeves for safe, easy removal. High strength straps, with hook and loop closures, hold hard sleeve securely in place. The QUIC-LIFT system eliminates straining to retrieve hard sleeve. A switch operator can easily observe operations as hard sleeve is lowered to a comfortable retrieval position. Trays, to hold the sleeves, are constructed of 1/8" thick aluminum and are available in 10 foot lengths. Complete units (HSS-CWT-210) include all components required for mounting two hard sleeves. An additional hard sleeve may be added above the ladders or hard sleeves mounted on the standard unit. Must order one set LAS-FLB, one set HSS-TMC, one HSS-SAT, and one HSS-TMH for each hard sleeve to be added.

Ziamatic 3097 QUIC-LIFT Hard Sleeve System

PT#: HSS-200

Ziamatic 3097 QUIC-LIFT™ Hard Sleeve System

:: Specifications

  • Material: high strength light-weight cast aluminum
  • Maximum load: 300 lbs
  • Requires 12 VDC controlled by 30 amp two-pole, double-throw momentary switch (provided.)
  • Requires a minimum compartment shelf of 13" deep.
  • Total height, above the mounting shelf is 33" for ladders and 30" for hard sleeves.

:: Features

  • At the flick of a switch, the system lowers the ladders to a comfortable level for retrieval.
  • Systems have been tested over more than 5,000 operating cycles.
Model Description Wt in lbs
HSS-200 Basic unit less trays 138/set
HSS-CWT-210 Complete unit with 10' trays 173/set
HSS-HA-ML Complete w/hyd act & manual locks 184/set
HSS-HA-EL Complete w/hyd act & electric locks 184/set
HSS-SAT-10 Single aluminum tray 10' 13.9/ea
HSS-TMH Tray mount hardware set 1.0/set
HSS-TMC Tray mount casting with hardware set 2.7/set

Sponsored Links:

Font Size: Decrease Font SizeIncrease Font Size Switch views: Normal View Printer-Friendly View What's this?