PRODUCTS > Fire Service Tools > Firefighting Agents > Non-Foaming Agents > Denko Drench™
Non-rabid spies?
Cut Knockout Time In Half!
Outperforms Class "A" Foam 2 to 1 For One-Third The Cost
Drench™ is a liquid additive designed to dramatically reduce extinguishing time when fighting class "A" and "AB" fires. By combining the properties of several products used in fire fighting today we have come up with one super concentrate that increases penetration, reduces friction, and cools like no other product in the past. Fire departments are cutting knock-out times in half and reducing water usage by as much as two-thirds.
Drench is a blend of four distinctly different chemical technologies maximizing the performance of several elements of the water. Penetration is increased up to 400%, friction loss is reduced by as much as 45% and vaporization takes place twice as fast. It can be used to safely and quickly extinguish any combustible that would normally be treated with water. This includes wood structures, bedding, trash compactors, hay, brush, forest, automobiles, and tires.
How is Drench used?
Drench has been designed with simplicity in mind. This product needs only to be poured directly into the water supply at a rate of one quart to five hundred gallons of water. In other words, just pour one bottle of this concentrate into a five hundred gallon booster tank and you're ready to go. Dispersion is immediate and no special equipment is required. If preferred, the product can be diluted with five gallons of water and then picked up with an eductor at a one per cent flow. Add an ounce to a pressurized water extinguisher, Hudson sprayer or Indian tank for incomparable performance, as well.
Because Drench will literally cut knockout time in half, man hours are cut in half, wear and tear on equipment is cut in half, water damage is cut in half and rekindles are virtually non-existent. Studies have proven that by using this product consistently on all class "A" and "AB" situations there is actually a budget savings at the end of the year. Therefore, Drench is actually cheaper to use than water.
Because drench is so highly concentrated just a very small amount of chemical is ever introduced to a system. As a result, this product will not cause corrosion in tanks or lines or gum up valves. Furthermore, the treated water can be safely left in the apparatus for extended periods of time. In addition, the same treated water can be used with high expansion foam or AFFF. This is a tremendous help to fire fighting agencies that have just one or two pieces of equipment.
Can Drench be used instead of Class "A" Foam?
Yes. As a matter of fact, Drench will out-perform most class "A" foams in regards to knockout times, water consumption and dissipation of heat. In addition, Drench is less than one-fifth the cost in use and doesn't require the purchase of special hardware.
PT#: DRN-501
Denko Drench™
Sponsored Links:
Home | Products | About Us | Contact Us | Search | Site Map
Privacy Policy | Promo Policy | Shipping Policy | Tax Exempt Policy & W-9 Form | Disclaimer | Feedback
© Copyright 1997-2021 Columbus Supply. All Rights Reserved.
Font Size:
Switch views:
What's this?