Columbus Supply

:: Specifications

• Dual 300 cfm Cart Mounted Pre-Filters with Automatic Drains
• 1ST STAGE FILTER w/ Filter Change Indicator, Removes Bulk Water and Particulate, 5.0 micron
• 2ND STAGE FILTER w/ Filter change Indicator, Coalescing Oil and Ultra-fine Particulate Filtration, .01 micron
• 3RD STAGE FILTER w/ Filter Change Indicator, Charcoal Removes Organic Vapors and Objectionable Odors, .03 micron
• Automatic Drains in 1st and 2nd Stage Filter Assemblies
• 2-year Warranty on CO Sensor and Monitor
• In-Line Carbon Monoxide (CO) Monitor with optional CO/O2 Monitor - Intrinsically Safe CSA Approved Models available
• Electrochemical Sensor for Specific Gas Detection and Rapid Calibration in less than 2 minutes
• Dual 9-Volt Battery Operation, 8-16 VDC and/or 115 Volt AC
• Safety Relief Valve set at 125 psi
• Solid Aluminum Block Manifold with manual drain
• 0-160 psi Pressure Gauge
• Visual Flowmeter to Verify Air Flow to Monitor
• External Case Mounted CO Warning Lights and Audible Alarm
• Remote DC Alarm Jack with Cover Cap, standard
• Maximum Inlet Pressure - 150 psi
• Cart Dimensions: 40"H x 20"W
• Weight: 42 lbs.
• BA-30 Blast-AirTM Cart, includes 30 cfm (48 cfm flow capacity) Breather BoxTM installed, 2 couplings, pneumatic tires, rear filters on BA-1CAA cart
• BA-50 Blast-AirTM Cart, includes 50 cfm (79 cfm flow capacity) Breather BoxTM installed, 4 couplings, pneumatic tires, rear filters on BA-1CAA cart
• BA-100 Blast-AirTM Cart, includes 100 cfm (123 cfm flow capacity) Breather BoxTM installed, 4 couplings, pneumatic tires, rear filters on BA-1CAA cart
• BA-100-6 Blast-AirTM Cart, includes 100 cfm (123 cfm flow capacity) Breather BoxTM installed, 6 couplings, pneumatic tires, rear filters on BA-1CAA cart
• BA-100-8 Blast-AirTM Cart, includes 100 cfm (123 cfm flow capacity) Breather BoxTM installed, 8 couplings, pneumatic tires, rear filters on BA-1CAA cart
• BA-1CAA Blast-AirTM Cart only, holds any size Breather Box™, supplied with two high capacity pre-filters & pneumatic tires
• BB100-A Pre-filter replacement element for Blast-AirTM Cart
• Replacement Filters: BB15 & BB30 Series Breather BoxTM Models: BB30-A Replacement particulate filter - 30 cfm, Stage 1
• BB30-C Replacement coalescing filter - 30 cfm, Stage 2
• BB30-D Replacement charcoal filter - 30 cfm, Stage 3
• BB30-FK Filter kit for BB30-CO series Breather BoxTM models Contains 1 ea. "A", "C", and "D" replacement filters
• BB50 Series Breather BoxTM Models: BB50-A Replacement particulate filter - 50 cfm, Stage 1
• BB50-C Replacement coalescing filter - 50 cfm, Stage 2
• BB50-D Replacement charcoal filter - 50 cfm, Stage 3
• BB50-FK Filter kit for BB50-CO series Breather BoxTM models Contains 1 ea. "A", "C", and "D" replacement filters
• BB75 Series Breather BoxTM Models: BB75-A Replacement particulate filter - 75 cfm, Stage 1
• BB75-C Replacement coalescing filter - 75 cfm, Stage 2
• BB75-D Replacement charcoal filter - 75 cfm, Stage 3
• BB75-FK Filter kit for BB75-CO series Breather BoxTM models Contains 1 ea. "A", "C", and "D" replacement filters
• BB100 & BB150 Series Breather BoxTM Models: BB100-A Replacement particulate filter - 100 cfm, Stage 1
• BB100-C Replacement coalescing filter - 100 cfm, Stage 2
• BB100-D Replacement charcoal filter - 100 cfm, Stage 3
• BB100-FK Filter kit for BB100-CO series Breather BoxTM models Contains 1 ea. "A", "C", and "D" replacement filters
• Replacement Sensors for Air Systems' Airline Monitors: CO-91NS New CO sensor for CO-91 series monitors (2 year warranty)
• CO2-O2 New Oxygen sensor for CO2-91 series monitors (1 year warranty)
• Airline Monitor Calibration Kits Small Calibration Kits 17 Liter Cylinder Size (disposable): BBK-20 Calibration Kit for CO monitors, 20 ppm CO gas, zero air, preset regulator, tubing and case
• BBK-10 Calibration Kit for Canadian CO monitors, 10 ppm CO gas, zero air, preset regulator, tubing and case
• Large Calibration Kits 103 Liter Cylinder Size (disposable): BBK-20103 Calibration Kit for CO monitors, 20 ppm CO gas, zero air, preset regulator, tubing and case
• BBK-10103 Calibration Kit for Canadian CO monitor, 10 ppm CO gas, zero air, preset regulator, tubing and case
• Calibration Gas and Accessories: BBG-00 Replacement Calibration gas, zero air, 17 liter
• BBG-10 Replacement Calibration gas for Canadian CO requirements, 10 ppm CO for BBK-10 kit, 17 liter
• BBG-20 Replacement Calibration gas, 20 ppm CO, 17 liter
• BBG-02 Oxygen sensor test gas, 20.9% in nitrogen, 17 liter
• BBK-R17 Calibration regulator for 17 liter cylinders, preset flow 300cc
• BBG-00103 Replacement Calibration gas, zero air, 103 liter
• BBG-10103 Replacement Calibration gas for Canadian CO requirements, 10 ppm CO for BBK-10103 kit, 103 liter
• BBG-02103 Oxygen sensor test gas, 20.9% oxygen in nitrogen, 103 liter
• BBG-20103 Replacement Calibration gas, 20 ppm CO, 103 liter
• BBK-R103 Calibration regulator and gauge for 103 liter cylinders, preset flow 300cc