Product: Qty:

Questions? | Quote | Email


Benefits: Backlight brightness is now officer adjustable just like the dashboard dimmer switch giving you the appropriate lighting for your eyes!

  • PA stuck mic sensor automatically returns the siren to normal function should the microphone switch get stuck in PA mode and microphone volume is adjustable.
  • Built in "Battery Voltage Check" Sensor shuts down lights and sirens when voltage runs below a programmed setting. No more dead batteries after a call!
  • Sleep Mode Timer to shut the lights and siren off after a specific preset time if the ignition is turned off.
  • Horn-ring transfer allows you to effortlessly scroll through siren functions on the steering wheel without having to take your eyes off the road.
  • Built In Siren lock function that does not allow siren tones to come on until emergency lighting is activated.

  • Code 3 Z3 Siren

    Code 3 Z3 Siren

    :: Specifications

    • Control Head: 6.80"L x 3.30"H x 1.07"D (Switch will increase depth dimension to 1.95"D)
    • Amplifier: 9.750"L x 6.83"W x 3.94"H
    • Light Control Current Load
    • 3-Level Switch, 4 Outputs, 50 Amps Maximum Combined Total
    • Auxiliary Switches A thru D: 5 Amps Maximum Each Aux
    • Auxiliary Switches E thru H: 10 Amp Maximum Each Aux
    • Total Siren Output Capacity: 200 Watts (can drive two 100 Watt speakers)
    • Operating Voltage: 10-15 VDC (negative ground)
    • Operating Temperature: -22F to +149F (-30C to +65C)
    • Meets SAE J1849, California Title 13, and 2004/104/EC when properly configured
    • 5-Year Warranty
    • Z3 Deluxe Remote Siren, 200w Output w/Programable Push Button and Slide Switch Controls
    • Z3-SWIF Steering Wheel Interface Module for Ford Interceptor Sedan & Utility
    • Z3HUB Connect the Siren Amplifier, Siren Control Head, Z3 SWIFT™,v Link™ and (2) additional devices
    • LFAMP Low Frequency Amplifier for use with Sirens including InterClear feature (Low Frequency Speaker required, see Speaker Section)

    :: Features

    • Built in Park Kill to automatically turn lights and siren functions off when the vehicle is put in park. This feature is also designed for positive or ground inputs so that park kill can also be activated by other inputs
    • Easy to operate with 3 distinct zones: sirens & primary lighting (red), auxiliary lighting and other equipment (blue), and traffic or warning function (yellow)
    • Different size and shape buttons are quickly found allowing you to operate all the light and siren functions without taking your eyes off the road. Buttons are also backlit and change color
    • Programmable 3 level slide switch with a programmable 4th position
    • 8 programmable auxiliary buttons (2 can be programmed for positive or ground switching
    • 5 programmable siren buttons (program different tones for each one)
    • ArrowStik® can be programmed for different flash patterns and speeds, as well as the warning flash pattern itself.
    • Z3 amplifier special serial port needs only a simple data cable to connect to the Defender and RX2700CC lightbars.

    Sponsored Links:

    Font Size: Decrease Font SizeIncrease Font Size Switch views: Normal View Printer-Friendly View What's this?