Product:

Air Quality Test Kit:

Contact us to purchase

Checkout

Certified laboratory air testing is now available for high pressure bottled air or low pressure compressor air requirements. Take your own samples in 10 minutes and send out for precise laboratory results. A2LA accredited lab will test to any recognized standards, e.g., CGA, NFPA, or Federal MIL Specs. Results can be obtained in less than 3 days; same day service is available for an additional charge.

  • The Responsibility for the Quality of Breathing air Rests with the User.

    The air supply compressor should be located in a safe, clean ambient air environment. This "safe" location should be tested periodically to ensure clean ambient air quality on a consistent basis. Total system air quality should be tested at the time the compressor is initially set up. If the compressor is moved, retesting air quality is recommended. Should the location or environment significantly change, the air quality should be retested.

  • Air Systems Air Quality Testing

    Air Systems Air Quality Testing

    :: Specifications

    • The CO & O2 Cylinder Test Kit has all the components to test breathing air cylinders.
    • Laboratory Testing Service: ACK-97 Air Check Kit™ purchase price (Purchase of AQT-1LS Required)
    • ACK-97R Air Check Kit™ - 2 week rental charge Purchase of AQT-1LS Required - consult factory for details
    • AQT-1LS Laboratory air quality test fee - per sample (one kit per test required)
    • AQT-1LSCSA Laboratory air quality test fee - CSA; per sample (one kit per test required)
    • Air Quality Test Kit Complete Test Kits: LP/HP-A4K Test kit - complete - 3000 psi maximum
    • LP/HPA445K Test kit - complete - 5000 psi maximum
    • Basic Component Test Modules: HP-A4 Bottled air quality test module, 3000 psi capacity, use with test module LP-A4
    • HP-A445 Bottled air quality test module, 5000 psi capacity, use with test module LP-A4
    • LP-47PF Total particulate test module, 20 psi max, use with test modules above, includes one pre-weighed 47 mm filter
    • LP-A4 Compressor air quality test module, maximum 100 psi system capacity
    • Basic Components for All Tests: HP-1A Replacement Carbon Monoxide test tube - box/10
    • HP-2A Replacement Carbon Dioxide test tube - box/10
    • HP-6A Replacement Water Vapor test tube - box/10
    • HP-109AD Replacement Oil Mist test tube - box/10
    • CAL007 Detector tube rubber holder
    • Compressed Air Cylinder Test Meter, CO & O2 Cylinder Test Kit: AQTCOO2KIT Test Kit - CO/O2 monitor, flow meter, high pressure 5K reducing regulator, 10 foot high pressure connect hose with CGA-347 universal hand tight cylinder connector.

    :: Features

    • Compressed Air Cylinder Test Kit: The Model AQTCOO2KIT Cylinder Test Kit was designed to rapidly test rented cylinder's breathing air quality before use and obtain an immediate and accurate Oxygen (O2) and Carbon Monoxide (CO) reading for blended high pressure cylinder air. The meter requires two 9-volt batteries for operation and is supplied with a 10 foot high pressure hose, 5000 psi regulator, and a universal CGA-347 hand tight cylinder connector.
    • Air Quality Test Kit: Air Systems breathing air quality test kits are designed to test the air produced by compressors (Model LP-A4) and compressed air in cylinders (Model HP-A4 and HP-A445). These tests are accomplished through the use of low cost detector tubes that provide a "go/no go" test of the air quality. If a high reading is found, this signals the user that they have a potentially unacceptable quality of breathing air. If this occurs, a laboratory analysis of the air components must be made to determine the exact readings of the air quality and take corrective action.

    Sponsored Links:

    Font Size: Decrease Font SizeIncrease Font Size Switch views: Normal View Printer-Friendly View What's this?